Are you looking to install new flooring in your house? Flooring is a great way to remodel the house. It will change the outlook of your home to a great extent. When someone is looking forward to the construction of their new home, one of the main things that they have to oversee is the flooring of the house. Flooring for homes as well as commercial establishments generally has a lot of choices, depending upon the taste and choice of the client. Choosing the correct type of flooring is somewhat very difficult, given the plethora of options available when it comes to flooring.

Now, choosing the best method to use for your flooring will completely depend on what type of floorings you have chosen for your home. Now, for installing new flooring, the step that you need to take at first, is that you need to remove the existing flooring completely, and you also need to ensure that the sub-flooring is also in a good condition.


Now, the subfloor is basically the layer that lays below the actual flooring, and generally supports the flooring above, and therefore before installing a new floor, you need to check if the sub floor has any damages or not. The best way to check for damages in a sub floor is by checking any dipping or sagging on the sub-floor. If there are any noticeable dips or sags, then you can notice it, and then take the necessary actions. If there are any problems with the sub-floors, then you may add support underneath so that there are no problems while installing a new floor, or you can also replace the areas that have been damaged, so that it is smooth. The more your sub-floor is smooth, the better is the new flooring once it is installed, especially in the case of tiles. In case of tiles, if the sub floor is not smooth, it might lead to cracks.

Floor Installation Tips

Although, the method of flooring mainly depends on the type of flooring you choose, there are some things which are generic. Some are listed below,

  • Make sure that the subfloor is as smooth as it can be, since this will give your new flooring the required shape.
  • Before you start installing the new floor, you need to gather all the right tools and equipment’s or maybe rent it.
  • Make sure that the flooring you have chosen to be installed is right for you, and therefore, it is always better to speak to the experts before you choose your flooring.

Installing Tiles or Pieces of Flooring

While you are installing tiles as your new flooring, you need to make sure that you have measured your floor before hands, and have cut the floor in to pieces to installed the new tiles. If there are any requirements, where you need to cut the tiles too, then you need to have the required tile cutter with you. It is important that you have a marker, to mark the floor in straight angles or curves as required to fit your tiles to it. It is a little complicated, since you have to mark the floor in to exact squares, where the four sides will be equal. Make sure that you line the tile up first in those consecutive squares before you actually fit them right in.

Hunt Club Flooring is the best flooring contractor in Ottawa, which has been serving the area since over a decade, and is the frontrunners in the flooring business now. Call them to know more about their services.