Leaky gutters are no joke; they can end up leading to huge repair expenses. Even a small leaky gutter can cause serious issues for you and your home by ruining your siding, fascia, soffit, to causing serious damage to your foundation.

 

As a homeowner, you must find the cause behind the gutter leakages so that you can begin to take proper steps to repair the problem and future leaks. In case of severe leakages, you must contact professionals’ provider of eaves trough service.

 

Diagnosing the Cause of Leak

 

You need to find the cause of gutter dripping. It is not something that you can do alone. Better to call a professional who can find and fix it in no time. Let’s have a look at them:

 

Clogs

 

Clogs are the most common type of gutter leakages that can occur due to the clogging of leaf litter and debris. Clogged gutters and downspouts are easy to spot. You need to clean your gutters regularly to get rid of a clogged drain.

 

Clogs tend to cause the water to back up and pour out over edges instead of the downspout. If your downspout is clogged, you’ll need to disconnect it from the gutter and the house to properly clean it out.

 

Cracks and Holes

 

Even the sturdiest materials can develop minute cracks and holes due to weathering. These minor leaks if left unnoticed can turn into bigger leaks over time.

 

Sometimes it becomes difficult to make out the problem in smaller spots; all you can do is pour some water to see where the gutter is leaking from. Most of the cracks are repaired by sealing it with a waterproof sealant or a caulk over the damaged spot. But for larger holes, it is necessary to remove the entire section and replace it with a new one.

 

Poorly Sealed or Separated Joints

 

Over time, the connecting joints of the gutter can rupture and separate. This can lead to leakage in the area around it. Some broken areas can easily be inspected while others require a crackerjack to find out.

 

Many joints can simply be repaired using a sealant. Otherwise, the entire area needs to be removed and replaced.

 

Improper Slope

 

Gutters need to be installed with a slight downslope that will help seep the water through downspout easily. With time, the gutters often begin to sag either because of loosing of fasteners or due to the weight of the water.

 

Improper slopes are not easy to fix; it usually requires the re-hung of sagging sections or the gutter itself.

 

Loose Fasteners

 

Gutters are attached to the fascia boards using screws, hangers or nails which are just driven into the gutter board, when they become loose, they can cause small leaks around the fastener directly onto the fascia.

 

This can cause fascia boards to rot. Therefore you need to take quick action on such problems otherwise you will have to get your fascia replaced.